Powder Coatings
In powder coatings we have the vast range of product mix viz Epoxy polyster/Pure polysters/PU/HR/Metallics/Low Cure with high end products in architecture segments durable and super durable grades with 15-20 years of warranty having Qualicoat certification conforming to Florida test. We also have HR powder coatings which can withstand temperature of 450 to 500 degree centigrade most suitable for fire pits.
Liquid Paints- Stoving/Air Dry
We supply liquid paints Alkyd/TSA/PU/HR/Soft feel clear based in Auto & GI Industries
The Name GI itself indicates that it contains all the general industries and OEMs, mainly other than Auto and HPC. Right from your household appliances to metal fittings in various factories, industrial coatings have a large variety of applications across all industries. Hence our product spectrum offers the entire gamut of comprehensive coating systems, ranging from basic Primers and Lacquers to Coil Coats, Heat Resistant Paints and Metal Decoration coatings.
HIGH PERFORMANCE Coatings
We supply high performance coatings primers/Intermediates/PU paints/PU Clear coatings
Protecton range was refurbished keeping in mind global emissions of volatile organic compounds and by introducing high volume solids paints, solvent – less paints, water based paints and such coatings which could offer excellent protection against corrosion for a longer period of time for both steel and concrete infrastructure in the most aggressive conditions.
The new generation construction primer meets the constraints of fabrication yard with quick or the extremely delayed over-coating interval. Cured with a tough phenalkamine hardener it offers an able replacement to the costly zinc rich solutions while maintaining the long duration accelerated weathering aggressive salt spray tests proving its corrosion resistance as second best to galvanizing. Dry film thicknesses of 75 to 150 microns are easily achieved in a single coat with compatibility to a range of top coats to choose from depending on the service condition.
Single coats finish for both steel and concrete over an epoxy primer for highly aggressive environs, capable of building dry film thickness of 300 microns in a single coat. Working results at field have shown no chalking in six months while maintaining the gloss and colour retention to a semi-glossy level thereby an ideal choice in off-shore platforms, pipelines and tank externals.
Steel structures exposed to high heat are protected with the range of coatings for temperatures up to 6000C. Newer versions are also available with added corrosion resistant benefits where heat resistance is required along with resistance to weather and moisture.
With tough film forming property, Polyurethanes are ideally applied over epoxy primers and topcoats for excellent protection to ultra-violet radiation and weathering. The range includes products for application in long term protection like windmill towers and in tough conditions like the exterior of rail coaches that cross various climate zones.
The latest addition to the range is Acrylic Polysiloxane coating an isocyanate free exterior top coat for steel structures applied over epoxy primers and as used in bridges, metro rail complex, and stadiums for long term colour and gloss retention properties. The product has undergone aggressive test exposures of 1000Hrs in QUV tests and successfully stays back with 80% gloss retention which is unsurpassed with any normal polyurethane coatings.
Hot Melt Road Marking Compound for Roads, Highways, and container yards require lane marking with retro-reflective properties for better visibility at night. Sigmark with drop-on glass beads is an ideal choice for both Bituminous roads and for Concrete roads, and applied at a thickness of 2.5mm as per MOST/ BS specification; they are put in to service within 30 minutes of laying the product on roads. Specific formulations as water based cold applied with drop-on glass beads are available for better visibility, wear resistance, skid resistance and high dirt pick-up resistance matching the AAI specification.
EPOXY FLOOR COATINGS
Industrial floors subjected to abuse due to contamination, erosion, and which require easy cleanability can have a long lasting glossy floor coating from a thickness range of 500microns to 5mm thickness. Other versions include antiskid floor coating and for increased load bearing requirements use of floor screed at thickness of 3mm to 5mm before the top coat is a welcome option to save on concrete refurbishment costs while improving the aesthetics of the floor appearance. The range includes self leveling and roller applied floor coatings.